Hanging an LED mirror involves two connected plans: secure wall mounting and a suitable electrical supply. Choose the position, check the mirror’s rear mounting system and wall construction, then coordinate the fitting with any electrical work. The supplied instructions determine the fixing positions and installation sequence.
Done well, the result feels effortless: the reflection sits at a comfortable height, the controls are within reach and the cable stays out of view. This guide helps you prepare the layout and installation, rather than treating every LED mirror as the same bracket-and-screw job.
Start with the reflection you want
Measure the available wall above the basin, including taps, lights and cabinets. Tape out the mirror’s overall size and check the view for the people using it. Leave enough access to engage the mounting system and reach the controls. A centred outline usually looks balanced, but basin positions and nearby fittings take priority over a rigid rule.
40 × 50 cm frontlit LED mirror — £89. Its compact outline suits a smaller clear wall, with adjustable lighting, memory and anti-fog for everyday use. Mark the real dimensions on the wall rather than judging scale from the room photograph.
Understand the product and wall before choosing fixings
Check the rear hardware, permitted orientation, net weight and fitting instructions. A bracket already attached to the mirror does not remove the need for the corresponding wall fixings. Identify whether the supporting wall is masonry or a partition, and check its condition and concealed services before drilling.
Choose a complete fixing system suitable for the actual wall and mounting hardware. Plasterboard is not automatically unsuitable, and a generic anchor is not automatically adequate. Read our heavy mirror planning guide and plasterboard and drywall mounting guide for the considerations to discuss with an installer.
Decide the electrical route early
Plan the cable exit, access and supply before finalising the bracket positions. Our bathroom mirrors support plug-in or hardwired arrangements, but a bathroom is not a place to use an ordinary socket wherever convenient. The chosen arrangement must suit the room and product instructions; a qualified electrician should complete fixed electrical work.
The bathroom mirror electrical guide explains the planning questions. Keep electrical wiring separate from the mounting decisions: secure screws do not establish that a supply location is suitable. These points concern bathroom mirrors, not battery-powered or tabletop makeup mirrors.
60 cm frontlit and backlit round mirror — £128. A circle gives the vanity a softer outline and uses 60 cm of wall height as well as width. Check the viewing position and control reach within that circle before marking the rear fixing positions.
Prepare a clean fitting area
- Keep the mirror protected and away from drilling dust while the wall hardware is fitted.
- Transfer measurements from the real mounting points or supplied template, and check the marks are level.
- Follow the fixing instructions for hole size, depth and installation; avoid guessed screw projection.
- Arrange enough help to lift the mirror without twisting the glass or pulling cables.
- Engage all required mounting points and retaining parts, then check the finished position as instructed.
An awkward or wide mirror may need more handling space than its footprint suggests. Clear the basin and protect nearby surfaces so the installers can work without balancing the glass on taps or sanitaryware.
Enjoy the features once installation is complete
80 cm round LED mirror with Bluetooth speakers — £269. Adjustable lighting, anti-fog and audio bring an enjoyable finishing touch to a larger vanity. Pair a compatible device after installation to play your music or podcasts.
Another round Bluetooth mirror listing provides a reference for that design. Check the selected product’s own details rather than assuming the same controls or mounting layout across all round models.
Prices and the linked in-stock options were checked on 27 October 2026. Any checkout promotion is applied separately.
Once the complete installation is ready, test the functions as instructed. If the light or controls do not work, contact support rather than opening the unit or checking live wiring yourself. Keep the instructions for later cleaning and maintenance.
Adapt the project to your home
Tenants should start with our rental-home mirror guide. For product and installation terminology, read UK bathroom mirror standards explained. If easy control access is the priority, our mirror guide for older users covers practical selection points.
Choose the shape and features you want, then plan the mounting and power around that exact mirror. It is the clearest route to a bathroom upgrade that looks good and works comfortably every day.
Enjoy free UK delivery, a 3-year warranty and free replacement if your mirror arrives damaged.